Видео

Sir Can you tell me RPM and Feed Use for material SS316L in 4mm Cobalt drill and depth 90 mm Use in VMC 3-Axis Machine This machine is not through coolant machine Drill Details 4mm Cobalt drill dia. and 120 length (HSS-E PFX Extra Length Dril) 2RG4369627 Bright Finish DORMER DIN 1869/1

What about precision

that is my dream, drilling deep hole without pecking

How much prize maching?sir

Aku membutuhkannya

Badly managed company. Seen it from inside.

is it possible to make a 0.3mm hole?

nicely explained...

What was used an arrow tipped drill?

What D.O.C would you run this at? 60% step over? Speed and feed also on F22? We have a 125mm one of these and have to take a lot of material off.

Lets see some speed!!!

Show de bola!!!!

that turbine blade is worthless, the mental was heated and cooled, heated and cooled to many times and puts stress deep in the material and you can't stress relieve that out. Had the turbine blade been flooded with coolant during machining then it would have been ok.

Good💪🤙🖕🦵

Randy, it would have been helpful to see an animation, or diagram of what was happening inside the bar. Thank you for your video.

When is kennametal going to embrace coatings for aluminum application specific tooling?!? DLC?? ZrN??? Anything?????

72xD 😱

bonjour Stickers : 1 chance sur 2 de gagner un lots de different stickers de sponsors et de Dynomax ➜ Tirage le 22 Novembre 2020 ruclips.net/video/SUQCy77gAj4/видео.html

72xD ????? Mine!!! LoL

Good luck good ☺🙂☺🙂

is that coolant hole spiral? how do they do that?!

hiii. i am raghu from india plz. contect me my whatapp no. is 917567411011.

our machines cant even feed that fast

4 Degree is always right ;)

Great

Which grade of the insert is used?

What a great company, well except for the whole shutting down factories and screwing people out of their livelihoods and ruining the economy of the town in which the factory existed long before Kennametal bought them out, but aside from that great company.

While Kennametal may buy up the successful company you work for and then shut it down, they always do it ethically.

@Kennametal Inc. How is it possible to take 1,2mm depth of cut with the 15° High Feed Mill at this feed rate? We have one in our shop and if I measure the depth which is possible to take with 15° it's about 0,9mm. If I'd take more, it would be an other angle. So I only use about 0,8mm

What would you recommend for HSM and a lot of pocket work requiring straight and ramp (20d?) plunging? We machine a lot of aluminum but at the feeds shown the parts we are making would probably take significantly longer.

Good

I'm not a machinest but I do have question the ceramic insert how is it that they don't break and why is ceramic better I do know inconel is pretty tough metal.

😳F me😳 “beyond”... beyond😬

What's the feed and rpm for kenametal modular drill dia 10mm

Im happy to see that this kinda company going online marketing, i keep getting some of your videos as ads, but im not the right audience to be showing your ads, i think you have to narrow down your audience and make it more focused and save your investment in marketing, never the less, all the best,

hi where can i buy this?

In the 21st century, the competition of machinery manufacturing industry is essentially the competition of numerical control technology, which is all-round. high quality cnc tool manufacturer www.ukocarbide.com/metal-working-tools-products-preview/

狗啃的 真醜

nice work!!

Seems to me that all that heat generated can't be good for the metallurgy of the material. I realize the heat is being thrown with the chip but there is alot of residual around the cutter that adds up. Almost sounds like a jig grinder at times!

:9 2019

i need drills for high speed drilling. dia 6mm depth 90mm, dia 5 mm depth 65mm for production please contact gurunanakautocom@gmail.com,9646549568

how to repair your tools ?

Me also worked in kennametal in Bangalore

Pretty bad video. That's not how you manufacture a turbine blade. This one would quickly melt.

I have to say, chatter in a product demo is never impressive. haha.

Great video example, can't wait to try this series.

- А так можно в любой стене дырочку сделать? (с)

did the workpiece pull out of the chuck or the tool out of the holder?

This is very impressive but what can you expect in terms of straightness assuming a well trammed machine and a properly prepared pilot hole? Materials most commonly used are St37 or 42CrMo4 steel (usually turning) and 6082 and 7075 aluminium (usually milling)